Monday Mountain thread

[Jay Criswell]

Bob T,

Yeah, but I wasn't able to make any real determination but it looks like a 10 to me.

Jay

[Seaboard Air Line Fan]

I did the search on 1744, here's a couple of photos:

SP 1744.jpg (82.7 KiB) Viewed 7414 times

SP 1744a.jpg (19.18 KiB) Viewed 7414 times

BobD

[Seaboard Air Line Fan]

Between 25-30 years ago, while visiting my then GF who ended up being my wife, I happened upon a RR museum in McCoomb MS and took these photos:

McComb1121.jpg (723.59 KiB) Viewed 7412 times

McComb2122.jpg (755.34 KiB) Viewed 7412 times

McComb3123.jpg (755.08 KiB) Viewed 7412 times

Not sure which RR this belong to but another interesting tender (although not quite a Monday Mountain qualifier)

BobD

[Jay Criswell]

BobT,

My first (or twentieth) thought was, that' has to be a 12. Looks way too long for a 9 or 10 but the angles are deceiving. Nothing is truly a right angels. The first photo looks like a 10 and the second looks much longer, like a 12. Obviously, there's only one tender?? I would go with the 10. A 10 has an o/a length of around 38' (coupler to buffer plate). A 12 is around 41'. The M-6 is around 38'. Using these rough dimensions I let the reader make their own determination.

BobD,

SP all the way (T&NO to be a little more specific). S-14 class built in 1924. The tender is often times called a sausage tender. BobT has a few. Westside had one behind their S-10 model.

Jay

[bob turner]

You mean the one on 1744, or the Max import for the LW Mike?

It might be time to get a broadside of each. Maybe Arnold Menke can help. He is always willing to share thoughts on tenders.

So hopefully that Mississippi S-14 survived? It looked pretty bad back then, with freight car trucks under the tender.

[bob turner]

[bob turner]

Lobaugh made them in 1939, and Stevenson Preservation Models makes them now.

[rogruth]

Lobaugh made them in 1939, and Stevenson Preservation Models makes them now.

Does this mean that there has been little change or improvement in O scale models since 1939?

[CMorrill]

Another indicator that it is a SP s-13 or s-14 is the raised right side running board. This allowed the power reverse to be mounted under the running board. Nearly all other SP 0-6-0 classes had the power reverse (if used) mounted on top of the running board.

Charlie

[Jay Criswell]

Yep, Charlie is correct.

That's why the Lobaugh is really only correct for the later 0-6-0s. Most people don't pick up on it.

Jay

[J. S. Bach]

Lobaugh made them in 1939, and Stevenson Preservation Models makes them now.

Does this mean that there has been little change or improvement in O scale models since 1939?

That is the funniest thing that I have read on MTJ in long while!!!! Thanks for the lift.

[bob turner]

I checked with Arnold Menke. He is the all time expert on SP tenders.

The 1744 tender is from the early F-1 series 2-10-2s. It is a 100-C-1, and has an oil tank that was cut down. Other than some of the EPSW tenders that look like a cross between a covered wagon and a Vanderbilt, these have to be the most ungainly - the ugliest tenders SP ever had.

Arnold writes tender appendices for all the Church books, and some of the Dunscomb books. The latest book is 2-10-2 and 4-10-2, and if you are an SP nut, you need this one. I have it, and every other book Church or Dunscomb ever did. I just forgot about that early 2-10-2.

[rogruth]

Dave,
You think I will get an answer?
I might now that I asked.
Ya gotta remember I really like ALL parts of MTJ.

[J. S. Bach]

Dave,
Ya gotta remember I really like ALL parts of MTJ.

So do I, so do I.

[bob turner]

A necessary correction: I gave Arnold a link to here, and he says to make sure you know that the short oil tank was initially constructed this way, not "cut down".

Arnold is a valued asset for SP steam fans.