Hobo Jungle

Play nice and have fun... AS OF JULY 12 2025, THIS FORUM IS LOCKED.
User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Postby rogruth » Wed Mar 26, 2008 2:32 pm

A lot of speculation on Jack but never positively identified.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

dougdagrump
Posts: 550
Joined: Tue Mar 14, 2006 3:25 am
Location: SoCal
Contact:

Postby dougdagrump » Wed Mar 26, 2008 3:02 pm

highrailjon wrote:LOL, guys!!!! :lol: I don't need to be drawing that kind of attention to myself!!!! Although this trailer hitch novelty is pretty cool! Thing is, I don't have a trailer hitch on my pick up truck!!!! :lol:
Image

Where in the hell did you find that ?
Just mite consider it if they aren't to outrageously priced, of course it would almost have to have one in front as well.
:lol:

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Postby 2railjon » Wed Mar 26, 2008 3:17 pm

Doug, I saw it here:
http://www.walthers.com/exec/productinfo/560-270
It looks like they're sold out at $39.95, but you may be able to do a Google search.










.
Running that red block Charlie.

GP
Posts: 623
Joined: Fri Apr 30, 2004 9:48 pm
Location: Atlanta, GA

Postby GP » Wed Mar 26, 2008 3:30 pm

highrailjon wrote:Doug, I saw it here:
http://www.walthers.com/exec/productinfo/560-270
It looks like they're sold out at $39.95, but you may be able to do a Google search.

You might try Raildriver products too:

http://www.raildriver.com/products/

GP










.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Postby rogruth » Wed Mar 26, 2008 3:38 pm

Jon,

You CAN cut the Scenic Express walls with a table saw.Not even any ragged edges.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Postby 2railjon » Wed Mar 26, 2008 3:41 pm

The styrofoam didn't melt? Or are your walls made of a different material?














.
Running that red block Charlie.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Postby rogruth » Wed Mar 26, 2008 4:39 pm

It's that hard foam.Cut without any problem.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Mitch
Posts: 5215
Joined: Sat May 28, 2005 2:06 pm
Location: Freeport, Pa.

Postby Mitch » Wed Mar 26, 2008 4:48 pm

Tramp wrote:Mitch, a friend of mine has a 1998 Dodge truck with a 5.9 liter engine. The vehicle has only 63,000 miles, but the engine is continually fouling the number 7 and 8 plugs. They are telling him he needs a new engine (5,300.00). The truck was driven very gently at a college until my friend bought it. He's loaded it to capacity, etc. in his landscaping business. Any thoughts?

Should've stated that the plugs are oil soaked.



Tramp, your friend DOES NOT need a new engine. The most likely cause is a blown out lower plenum gasket. Here's how you can easily determine if the lower gasket is gone. Pull the PCV valve out of the valve cover, and remove the breather hose from the aircleaner and have someone start the engine. Hold the thumb of one hand over the breather hose, blocking any air from getting inside the engine. Hold the thumb of your other hand over the PCV valve, (it will suck your thumb in), and with a finger of the same hand, stick your finger into the valve cover opening where the PCV should be. If it pulls the slightest amount of vacuum on your finger, the lower gasket is gone. All mid to late '90s 3.9, 5.2, and 5.9L engines were notorious for this problem. The lower plenum gasket was originally a pressed paper style, the replacement gasket is a paper layered steel shim.

The worst case scenario is for #6 & 8 on the right bank to suck oil and foul the plugs. Usually the complaint is oil consumption without smoke, and pinging under moderate throttle or light load.

The factory time was about 2.2hours to pull the intake manifold and fix it. You can hit the 2.2hrs after you've done about a dozen of them. Any questions, you know where I'm at.
If you agree with the Progressives, it's freedom of speech. If you disagree, it's hate speech. There are no alternatives.

ANG retired
Posts: 1977
Joined: Fri Jun 16, 2006 10:41 am
Location: Garage of Doom

Postby ANG retired » Wed Mar 26, 2008 5:46 pm

I "HAD" a pair of them, one for each end (The Comanche known as Little Ugly has recievers in both bumpers, see my avitar) BUT, some ****** decided he liked the rear one more than I did!

Needless to say, I don't keep 'em in anymore. There's another reason I don't keep hitches in the recievers, that being RUST!!!

On my wife's Cherokee, the insert was so galled in place, it took a full bottle of acetylene to heat the hitch enough to get that SOB out! (Yes, that was an expensive trip to the welder's shop, and I took the hitch off before I took it. Sucker was too close to the fuel tank for that kind of heat)

Plus, I hate banging my shins off those fawkin inserts![/i]
Bob
Rufus T. Firefly wrote:Simplify.....be where everyone else is not. :wink:

User avatar
Mitch
Posts: 5215
Joined: Sat May 28, 2005 2:06 pm
Location: Freeport, Pa.

Postby Mitch » Wed Mar 26, 2008 5:50 pm

The Dirt wrote:
"A new engine" seems premature.
But then you know :arrow: mechanics and problems with prematur... uh...never mind. :wink: :D



You're a funny man, Dirt! :lol:

When I was much younger, I could do it all night. Now it takes all night to do it. Uh, that is, when I get lucky. I can't remember the last, uh, nevermind.
If you agree with the Progressives, it's freedom of speech. If you disagree, it's hate speech. There are no alternatives.

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Postby 2railjon » Wed Mar 26, 2008 6:35 pm

Man. I'm thinking hard about pulling the trigger on this all black skyline cased mountain that Gary from 3rd Rail is teasing me with. Anyone else think it's gorgeous?
Image
Running that red block Charlie.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Postby rogruth » Wed Mar 26, 2008 8:04 pm

Of course.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
AG
Posts: 5017
Joined: Sat May 20, 2006 7:41 pm
Location: Boynton Beach FL.

Postby AG » Wed Mar 26, 2008 8:06 pm

highrailjon wrote:Anyone else think it's gorgeous?
Image

Sure is gorgeous, you are showing Us naked womans!!!!!!
Andre.
"You can checkout any time you like, but you can't never leave"
www.riverleafmodels.us.

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Postby rogruth » Wed Mar 26, 2008 8:17 pm

:shock: :wink: :wink: :lol: :lol: :lol: :lol: :lol:
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
AG
Posts: 5017
Joined: Sat May 20, 2006 7:41 pm
Location: Boynton Beach FL.

Postby AG » Wed Mar 26, 2008 8:19 pm

rogruth wrote:I bet Andre has brass ones.

and shiny..... :lol: :lol:
A.
"You can checkout any time you like, but you can't never leave"
www.riverleafmodels.us.


Return to “The Club Car Lounge”

Who is online

Users browsing this forum: No registered users and 83 guests