ArmorAll!

All Facets of O-Gauge, 3-Rail, Model Railroading
User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

ArmorAll!

Postby ScaleCraft » Sun Sep 13, 2020 7:58 pm

https://www.ebay.com/itm/Lionel-Postwar ... 2697625829

Right over the paint nicks, chips and scratches.
The puzzling thing is the (apparently) pristine side, main and eccentric rods, with the upper valve gear rusty (RH side) AND the "decor" wires rusted (boiler handrails).
Did someone remove, wire brush, clear the parts and not do them all?
$70 + $20 to ship with no bid option and no tender....uh, no.
Dave....gone by invitation

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: ArmorAll!

Postby chuck » Sun Sep 13, 2020 8:29 pm

Wrong trailing truck. Does not have the Baldwin drivers. Boy does it shine!
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: ArmorAll!

Postby ScaleCraft » Sun Sep 13, 2020 9:20 pm

"Variation F: This variation’s most notable feature is that it has spoked drivers instead of the Baldwin discs featured on all of the other variations. Issued during the Korean War when magnetic material was at a premium, this locomotive does not have Magnetraction. It also has the redesigned pilot with simulated coupler, black steel motor frame sides instead of non-magnetic aluminum, BLACK painted smoke stack that was a separate piece, a sheet metal two axle trailing truck, and a RED and GOLD keystone decal on the boiler front that is numbered "5690". Came with a No. 6466W tender with staple-end trucks that had one magnetic coupler. (1952)"

https://www.tandem-associates.com/lione ... 5_loco.htm
Dave....gone by invitation

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: ArmorAll!

Postby chuck » Sun Sep 13, 2020 9:53 pm

Yes, but it doesn't explain the wrong trailing truck.

And those drivers are ugly. Never liked them on any locomotive. They really do make the engine look like a toy.
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: ArmorAll!

Postby ScaleCraft » Sun Sep 13, 2020 9:56 pm

", a sheet metal two axle trailing truck,"
Dave....gone by invitation

User avatar
ScaleCraft
Posts: 6693
Joined: Thu Jan 26, 2012 10:15 pm

Re: ArmorAll!

Postby ScaleCraft » Sun Sep 13, 2020 10:21 pm

I always hated those 4 wheel cheapie trailing trucks. Had several engines that came with them, got proper 2 wheel trucks and fixed them. I still have a couple of the 4-wheel units in a box.
Didn't like the change to the cast in dummy coupler on the nose, either. Swap the cylinder block or grind it off.
Some I left, but my coupler conversions have to cut through it anyway.

Never liked the high headlight smokebox fronts. All mine were changed to center headlights almost before the 225E boiler conversions.
Dave....gone by invitation

User avatar
jlong
Posts: 12257
Joined: Fri Apr 30, 2004 2:26 pm
Location: Kaukauna, Wisconsin

Re: ArmorAll!

Postby jlong » Mon Sep 14, 2020 8:48 pm

Just goes to show you. Postwar prices have not tanked. It's grading standards that have tanked.
John Long

One nation under Josh with ozone an magnetraction for all

User avatar
chuck
Posts: 5867
Joined: Thu May 27, 2004 8:43 pm
Location: Plymouth, Michigan
Contact:

Re: ArmorAll!

Postby chuck » Mon Sep 14, 2020 9:10 pm

Just goes to show you. Postwar prices have not tanked. It's grading standards that have tanked.


Now that's priceless! LOL
Once I built a railroad, I made it run,
Made it race against time.
Once I built a railroad, now it's done --
Brother, can you spare a dime?

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: ArmorAll!

Postby rogruth » Mon Sep 14, 2020 11:07 pm

jlong wrote:Just goes to show you. Postwar prices have not tanked. It's grading standards that have tanked.

Ahhh. That's it!.
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

Chris Webster
Posts: 935
Joined: Mon May 25, 2015 8:25 pm

Re: ArmorAll!

Postby Chris Webster » Tue Sep 15, 2020 8:57 am

jlong wrote:Just goes to show you. Postwar prices have not tanked. It's grading standards that have tanked.

:D

Seller included his phone number in the photos -- that's a sign that he's probably willing to sell it for less if you negotiate a deal with him directly, off of feebay.

User avatar
Rufus T. Firefly
Posts: 42106
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: ArmorAll!

Postby Rufus T. Firefly » Tue Sep 15, 2020 9:40 am

Chris Webster wrote:
jlong wrote:Just goes to show you. Postwar prices have not tanked. It's grading standards that have tanked.

:D

Seller included his phone number in the photos -- that's a sign that he's probably willing to sell it for less if you negotiate a deal with him directly, off of feebay.


Might also be a sign that he's really lonely and wants lots of robocalls...........
Evil cannot create anything new, it can only corrupt and ruin what good forces have created or made.


Return to “O-Gauge, 3-Rail, Model Railroading”

Who is online

Users browsing this forum: Baidu [Spider] and 26 guests