Hobo Jungle
Jon, in looking at my old water tower, I'm sure you can do a much better job painting yours than that. If I had to do it again, I'd weather mine differently. Maybe the best thing to do is look at some pictures of prototype towers.
Can't wait to see your tower, buddy! I might make one in O-scale soon too. Maybe you can give some pointers. Where are you buying the hardware?
Can't wait to see your tower, buddy! I might make one in O-scale soon too. Maybe you can give some pointers. Where are you buying the hardware?
-
ANG retired
- Posts: 1977
- Joined: Fri Jun 16, 2006 10:41 am
- Location: Garage of Doom
Tramp, some of the hardware I'm going to rob off my demolished MTH tower, ie, the spout, chains, weights, and rollers. The nuts and washers I've ordered from Grandt Line. See here:
http://www.grandtline.com/model_railroa ... _pages.htm
The hoops for the tank I'm going to run some solid copper wire through a roller press at work.

http://www.grandtline.com/model_railroa ... _pages.htm
The hoops for the tank I'm going to run some solid copper wire through a roller press at work.

-
ANG retired
- Posts: 1977
- Joined: Fri Jun 16, 2006 10:41 am
- Location: Garage of Doom
-
ANG retired
- Posts: 1977
- Joined: Fri Jun 16, 2006 10:41 am
- Location: Garage of Doom
The ones I have seen are steel, or iron round bar, threaded on the ends for a turnbuckle. The round bar is cheaper than flat, plus it's a little stronger, and easier to thread the ends.
Usually, the tanks had more bands on the lower portions of the tank, and wider spacing towards the top.
The reason; more pressure/weight at the bottom of the tank that at the top.
Another place to get a perspective on the engineering is old wooden silos. Same problem, same solution.
(plus you can also look for old tractors in the process!
)
Usually, the tanks had more bands on the lower portions of the tank, and wider spacing towards the top.
The reason; more pressure/weight at the bottom of the tank that at the top.
Another place to get a perspective on the engineering is old wooden silos. Same problem, same solution.
(plus you can also look for old tractors in the process!
-
ANG retired
- Posts: 1977
- Joined: Fri Jun 16, 2006 10:41 am
- Location: Garage of Doom
Tramp wrote:I can't find a single beer or beer drinker on this forum. There used to be some lads around the fire. I guess I'll head on down the line. Way she goes.
Since Rolling Rock became just another flavor of water, sorry!
I'd offer ya one, but, hey, I'm at work, and they have a dim view of the cans on my desk!
-
ANG retired
- Posts: 1977
- Joined: Fri Jun 16, 2006 10:41 am
- Location: Garage of Doom
-
P&R Pete
NEW YORK (AP) - No, Katie Couric didn't suddenly lose 20 pounds. The incoming "CBS Evening News" anchor appears significantly thinner in a network promotional magazine photo thanks to digital airbrushing.
The touched-up photo of Couric dressed in a striped business suit appears on the inside of the September issue of Watch! which is distributed at CBS stations and on American Airlines flights.
CBS News President Sean McManus said he was "obviously surprised and disappointed when I heard about it."
I, for one, find this to be the most inconceivably inconsequential and insignificant news item I have ever seen in my entire 57 years.
Couric, 49, said she hadn't known about the digitally reworked version until she saw the issue. The former NBC "Today" show host told the Daily News, "I liked the first picture better because there's more of me to love."
Yes, "love", the word that LEAPED into my mind.
Couric debuts in the anchor's chair Sept. 5. CBS has spent millions on marketing to prepare viewers for her arrival.
"Millions".
Please excuse me while I go f*cking vomit.
Return to “The Club Car Lounge”
Who is online
Users browsing this forum: No registered users and 143 guests

