And the price of brass continues to grow...

[Rufus T. Firefly]

Also of interest:
eBay item number, 333171683213 Sunset Models 3rd Rail Brass O Scale New York Central P2 Engine 4-6-6-4 Electric
Notice the loose parts taped to the painted and decaled shell.

Had not noticed the taped on parts - that'll do wonders for a paint job,

[2railjon]

LOL!!
My CUT arrived in need of drive repairs, luckily no parts were taped on!

[J. S. Bach]

I like it, but then I am partial to heavy electrics. A Baldwin Model Loco Works NH EP-3 done up for Denver & Intermountain???? being inspected by the former superintendent of motive power:

100_6152.JPG (993.72 KiB) Viewed 8379 times

[rogruth]

Dave,
Did it pass inspection?

[Chris Webster]

I had seen that one and wondered if anyone else here had looked at it.

I can't recall seeing many models of CB&Q steam, other than John Swanson's HO scale kitbashes in RMC years ago.

Had not noticed the taped on parts - that'll do wonders for a paint job,

Not a problem for a buyer that's going to strip and repaint it into Penn Central.

[Chris Webster]

A Sunset 2-rail NYC J-1A Hudson factory painted as #5200 sold for $305 on September 6:
Ebay #174016127514
The blurry pictures probably cost the seller.

[Rufus T. Firefly]

Had not noticed the taped on parts - that'll do wonders for a paint job,

Not a problem for a buyer that's going to strip and repaint it into Penn Central.

What? Not the CG&W?

[J. S. Bach]

Oddly, a Sunset two-rail GG-1 just sold in a Stout auction for $325.00 and an NYC T3a for $250.00.

[bob turner]

I would have jumped on either of those, and I do not need more trains. Or you could jump on the Max Gray Daylight for $2500 - two extremes bracketing the market. At least now we get to watch daily.

[J. S. Bach]

Dave,
Did it pass inspection?

Yes it did.

[2railjon]

Oddly, a Sunset two-rail GG-1 just sold in a Stout auction for $325.00 and an NYC T3a for $250.00.

[Chris Webster]

Bill Davis just sold a factory-painted Overland SD75M with Eric Stott drive for $1,650: Ebay #352772812546

Another one, albeit with factory drive, is currently listed with a starting bid of $1,380: Ebay #274034775262

[E7]

Any idea what Eric charges for one of his drives (installed)?

That auction buyre may have saved enough for a couple bethgons.....well, maybe one.

[ScaleCraft]

The title of this thread causes me to dwell on the realities of said statement.

While it is probably true, given the small sliver of items we see.....if you take an arbitrary starting point and extend to this day.

I was perusing a OLD RMC this morning. About 20 years old.

Just in Half Zero, looked at the price of brass, and my data point on the graph, if you extend backwards from the arbitrary starting point 20 years, seems to strongly indicate buying and selling brass is NOT a good way to make money.

To paraphrase an old saying, "You know how to end up with $1,000 selling brass?"
"Start with $10,000 of brass and wait 20 years.

Couldn't ever get into that. Had offers to buy, some really good offers.....but, no.

The best thing is, the scrap value of brass is good.

[E7]

I was perusing a OLD RMC this morning. About 20 years old.

Just in Half Zero, looked at the price of brass, and my data point on the graph, if you extend backwards from the arbitrary starting point 20 years, seems to strongly indicate buying and selling brass is NOT a good way to make money.

Take it for a certainty that there are SOME people who do just that.

To paraphrase an old saying, "You know how to end up with $1,000 selling brass?" "Start with $10,000 of brass and wait 20 years.

I've seen it more often stated: "If you want to make a small fortune importing brass, start with a large one."

Considering the price of MMW's bethgon ($600 a pop) it's going to become a bit harder (for re-sellers) to do so. There were people talking about buying 100 of them on the other Forum. More power to them if they have that kind of loot!