Page 1 of 2
What!?!?!?
Posted: Fri Sep 11, 2020 1:07 am
by ScaleCraft
https://www.ebay.com/itm/GP-7-o-gauge-l ... 4075130312Insufficient information to ascertain reliably the lineage of the original model shown.
There is so much paint on this...thing....it is running off the edges of the roof, has adhered the shell to the deck, covered the blades on the fans, melted the vents on the nose, every handrail is missing, except the grabs on one end, and they just had to brush the roof with a different color blue, didn't they?
$45. No. $12 to ship, no. The amount of work to strip it back, then find all the missing railings and supports, repaint, re-decal (see the CONRAIL on the end not even close to centered?), and after all that, you have a dummy.
Holy Smokes.
Re: What!?!?!?
Posted: Fri Sep 11, 2020 10:25 am
by chuck
That's a Red Caboose GP-9 kit! I've build one. The had rails on the nose are add on's, aka not molded in! The frame is the kit frame intended for two rail chain drive. The steps are fixed to the frame. They just figured out a way to put a couple of dummy trucks on that frame. I guess you could say its on its way to the scrap yard? I've never seen such a sloppy paint job/assembly on what is/was a pretty nice kit.
What it's supposed to (or could) look like:

Re: What!?!?!?
Posted: Fri Sep 11, 2020 11:32 am
by Rufus T. Firefly
chuck wrote:That's a Red Caboose GP-9 kit!
So much paint on it and so messed up I did not recognize it to be that kit.......

Re: What!?!?!?
Posted: Fri Sep 11, 2020 4:17 pm
by chuck
melted the vents on the nose
You mean the number boards and class lights? Some of the lift rings are still on the long hood but they are completely filled in. Look like ping pong paddles! Wow!!!!!! Looks more like "blue brush on sludge" than paint. An example of how NOT to paint anything.
Almost as bad as the work study's that painted a book case to the concrete floor in the shop. No newspaper, no attempt to put shims under it. Extra heavy coat required a utility knife to cut it free AFTER the five days it took to dry.
Re: What!?!?!?
Posted: Sun Sep 13, 2020 8:01 pm
by rogruth
Are these items of dubious value being sold by people who don't know that it is mostly junk?
Or do they just have a lot of gall to try to fool buyers?
Re: What!?!?!?
Posted: Sun Sep 13, 2020 8:26 pm
by chuck
Are these items of dubious value being sold by people who don't know that it is mostly junk?
Or do they just have a lot of gall to try to fool buyers?
Yes. aka to both.
Re: What!?!?!?
Posted: Mon Sep 14, 2020 8:06 pm
by philo426
It us kinda a mess mine is pretty cool

!
Re: What!?!?!?
Posted: Mon Sep 14, 2020 8:09 pm
by philo426
It us kinda a mess mine is pretty cool

!
Re: What!?!?!?
Posted: Mon Sep 14, 2020 8:09 pm
by philo426
It is kinda a mess !mine is pretty cool

!
Re: What!?!?!?
Posted: Mon Sep 14, 2020 9:36 pm
by chuck
OMG, he sold that total POS.
BTW, the real give away on the Red Caboose unit was the lack of the giant Phillips head screw that usually secures the shell to the frame which is clearly shown in the nice Conrail photos.
I still can't believe someone actually paid for that "custom" botch job of a dummy locomotive. There is definitely a dummy involved, probably a couple of them.
Re: What!?!?!?
Posted: Mon Sep 14, 2020 9:38 pm
by philo426
Yes it is an old Lionel unit I repainted!
Re: What!?!?!?
Posted: Mon Sep 14, 2020 11:17 pm
by chuck
Yes, you did a really nice job on the paint and the decals.
Polar opposite of the POS unit that was on eBay. I can't imagine how they did what they did to that model. House paint that was brushed on and then over sprayed with lint from the clothes dryer?
Re: What!?!?!?
Posted: Mon Sep 14, 2020 11:44 pm
by philo426
Skill levels vary ;but if you don't know what you are doing,one should not practice on that jeep!
Re: What!?!?!?
Posted: Tue Sep 15, 2020 12:29 am
by philo426
Here is a custom .Gulf,Southern and Ohio!

Re: What!?!?!?
Posted: Tue Sep 15, 2020 12:31 am
by philo426