Page 1 of 1
Crovan K4 pulling Pomona cars
Posted: Fri Jan 01, 2021 1:41 pm
by Carey Williams
Happy New Year ! Crovan PRR K4 from the early 1930's repowered by Jerry White in the 50's 60's ....runs like a dream ...pulling a ScaleCraft reefer and Pomona Streamlined cars from 1940-41.
K4 is Happy for the exercise ...locked in a traveling case wrapped in 1987 newspaper .....add a bit of oil , turn motor over a few times ...add voltage ..springs alive ! When the headlight works .. you know it's a good running engine .
Cheers Carey
Video link for all the action
https://youtu.be/1iJqvJHA6Rg
Re: Crovan K4 pulling Pomona cars
Posted: Fri Jan 01, 2021 8:23 pm
by bob turner
Seriously good looking, and runs beautifully. I note that CroVan used the MRR Cyclopedia boiler contour, like USH.
Who painted the cars?
Re: Crovan K4 pulling Pomona cars
Posted: Fri Jan 01, 2021 8:52 pm
by rogruth
I agree with Bob, Beautiful train.
Now this will probably get me banned from the 2 R forum.
So after you awoke it from a 30+ year sleep it ran just the way a Lionel loco would.
Yes, I do know there is a lot of difference.
Re: Crovan K4 pulling Pomona cars
Posted: Fri Jan 01, 2021 10:27 pm
by Carey Williams
Hello all
The cars I believe are factory built by Pomona ...they knew what they were doing ..Pomona built some beautiful cars ....just too few of them,...rather hard to find these days .
Pomona would sell you a whole train ..mirroring the prototype car consist . Many car sets were listed in thier catalog ....hopefully more are out there yet to be found.
Lionel !#!! No soup for you ..
This engine will crawl or highball ...set the voltage and walk away ....up and down the grade ...smooth,smooth ...
This is one of those engines that will be running hundreds of years from now ...it's already nearing 90 ...granted it's had a heart transplant .
Cheers Carey
Re: Crovan K4 pulling Pomona cars
Posted: Fri Jan 01, 2021 10:35 pm
by rogruth
Carey Williams wrote:Hello all
The cars I believe are factory built by Pomona ...they knew what they were doing ..Pomona built some beautiful cars ....just too few of them,...rather hard to find these days .
Pomona would sell you a whole train ..mirroring the prototype car consist . Many car sets were listed in thier catalog ....hopefully more are out there yet to be found.
Lionel !#!! No soup for you ..
This engine will crawl or highball ...set the voltage and walk away ....up and down the grade ...smooth,smooth ...
This is one of those engines that will be running hundreds of years from now ...it's already nearing 90 ...granted it's had a heart transplant .
Cheers Carey
Carey,
That's my point. Many Lionel locos, as I'm sure you know, are still running after70 + years with minimum maintenance.
And I know there is not much comparison. Also please understand that I like trains of any type and any size.
Re: Crovan K4 pulling Pomona cars
Posted: Mon Jan 04, 2021 2:00 am
by De Bruin
Roger you're not not too far off, the older prewar kit-built (like Mi-Loco, SCM, etc) and early KTM import steamers often run like watches on old-school layouts too like on Carey's or the Atlanta club's high iron (literally... hand- laid, bronze and steel, code 172)
My experience the newer stuff not so much, though (opinion) it's not really built to run on that kind of environment like the power and track we're employing (blazing analog DC, sans command control, no code 125 or 148, and the ridiculously heavy rolling stock often with comparatively crappy trucks)
Those Pomona Valley cars are gorgeous too and big (17/64)
Awesome video Carey thanks!
Re: Crovan K4 pulling Pomona cars
Posted: Mon Jan 04, 2021 2:01 am
by De Bruin
De Bruin wrote:Roger you're not not too far off, the older prewar kit-built (like Mi-Loco, SCM, etc) and early KTM import steamers often run like watches on old-school layouts too like on Carey's or the Atlanta club's "high iron" (... hand- laid, bronze and steel, code 172)
My experience the newer stuff not so much, though (opinion) it's not really built to run on that kind of environment like the power and track we're employing (blazing analog DC, sans command control, no code 125 or 148, and the ridiculously heavy rolling stock often with comparatively crappy trucks)
Those Pomona Valley cars are gorgeous too and big (17/64)
Awesome video Carey thanks!
Re: Crovan K4 pulling Pomona cars
Posted: Mon Jan 04, 2021 2:01 am
by De Bruin
Roger you're not not too far off, the older prewar kit-built (Mi-Loco, SCM, Lobaugh etc) and early KTM import steamers often run like watches on old-school layouts too like on Carey's or the Atlanta club's "high iron" (... hand- laid, bronze and steel, code 172) though caveat if they were assembled correctly to begin with.
My experience the newer stuff not so much, though (opinion) it's not really built to run on that kind of environment like the power and track we're employing (blazing analog DC, sans command control, no code 125 or 148, and the ridiculously heavy rolling stock often with comparatively crappy trucks)
Those Pomona Valley cars are gorgeous too and big (17/64)
Awesome video Carey thanks!