This is same, easier to load:
http://www.adc40.org/docs/paper_award/2004 Paper Award.pdf
Cheap-O Auto Parts Train (in breakable styrene & basswood)
- ScaleCraft
- Posts: 6461
- Joined: Thu Jan 26, 2012 10:15 pm
- Location: Floe Ice, Auntarctica
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
Dave....collector, restorer, and operator of the finest doorstops
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
On a separate note, and coincidentally am working on the last of three Reading paint jobs, here specifically a KTM SD45 which ironically had a stop dead bind in one of its two trucks which I was able (thanks to both Sarge and Jay) to disassemble and isolate to this split gear on the box closest to the motor. The split let the OD of the gear “wander out” and lock up against the (in the attached upper) portion of the cylindrical worm gear that held the set screw.
Yuck.
Yuck.
Litigation Crisis Consultant- remediating legal-media issues; mitigating federal, state and local investigations, court orders etc. Your serial felony history, contractual defaults, bankruptcies no big deal.
contact morbo@getoffthehook.com
contact morbo@getoffthehook.com
- ScaleCraft
- Posts: 6461
- Joined: Thu Jan 26, 2012 10:15 pm
- Location: Floe Ice, Auntarctica
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
Dave....collector, restorer, and operator of the finest doorstops
-
- Posts: 820
- Joined: Mon May 25, 2015 7:25 pm
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
Regarding the GN SD45 models, here's a photographic slide of the prototype that sold on ebay -- the image shows a GN SD45 consisted with a BN SD45, a BN U30C, an A-B set of Northern Pacific F-units and a BN C425:
Ebay #204049685799 - slide, Great Northern / BN #6428 leads a mix of early BN units at Willbridge, OR (1972)
Ebay #204049685799 - slide, Great Northern / BN #6428 leads a mix of early BN units at Willbridge, OR (1972)
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
A nice selection, but they were a bit too far away. I kinda liked the babe hanging out the window.
Rich
Rich
-
- Posts: 5820
- Joined: Wed May 16, 2007 8:30 pm
Re: Cheap-O Auto Parts Train (in breakable styrene & basswood)
Hmmm, I saw that, too!
Anyway, I have a KTM GN SD45 with the horns mounted near the middle of the long hood.
Anyway, I have a KTM GN SD45 with the horns mounted near the middle of the long hood.
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: No registered users and 18 guests