Feebay "Turner" Special

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
R.K. Maroon
Posts: 3136
Joined: Tue Feb 22, 2011 9:20 pm

Re: Feebay "Turner" Special

Postby R.K. Maroon » Tue Aug 14, 2018 12:52 pm

Bob -- Two things:

First, I was surprised as anybody that those two Baldwin and one Adams/Sieber E-units sold for what they did. Of course, Trainz misrepresented them as all Adams, but anybody that believes what Trainz says without verifying it gets what they deserve. I was likewise surprised that Railchief apparently bought them, but I do know he is always on the lookout for parts so he may have indeed bought them to strip and flip.

Second, the PRR E unit that you show looks like an Exacta model. The slant in the forward vent is one clue (Exacta/Central Lines later corrected this mistake). Exactas had the cast sides and are missing any Adams and Son mark from the castings, though I believe A&S actually did the casting work for them.

Exacta E7 B&O 57.JPG
Exacta E7 B&O 57.JPG (81.27 KiB) Viewed 3208 times

Note that the roof does not match either of the two well-know Adams & Son E-unit roofs (offset stacks or centered stacks). Further discussion on this can be found in OST #88 Nov-Dec 2016. Since that was published I have found an Exacta flyer which confirms that their E-unit was indeed all cast.

Jim
The link below any photo will display the image full size

bob turner
Posts: 13645
Joined: Sat Jan 13, 2007 7:57 pm

Re: Feebay "Turner" Special

Postby bob turner » Tue Aug 14, 2018 1:29 pm

Rich - thanks for the tip. There is plenty of metal in these pilots to cut them back a bit. I need to invest in a good skinny belt sander.

Jim - I was told that the two Exacta E-7s I got from Milt Sorenson were the only ones - then that PRR unit arrived with a matching aluminum B. Do you suppose all the cast side Es were Exacta? I will go back and check your article . . .

stephen neill
Posts: 151
Joined: Thu Jun 23, 2016 6:16 pm

Re: Feebay "Turner" Special

Postby stephen neill » Tue Aug 14, 2018 1:57 pm

I have an Exacta B unit body. It is constructed the same way their streamlined passenger cars are. It has Exacta stamped inside of it as the passenger cars do. I'd post a photo but I can't find it.
Steve

bob turner
Posts: 13645
Joined: Sat Jan 13, 2007 7:57 pm

Re: Feebay "Turner" Special

Postby bob turner » Tue Aug 14, 2018 2:21 pm

Their attempt at an FT was horrible!

User avatar
R.K. Maroon
Posts: 3136
Joined: Tue Feb 22, 2011 9:20 pm

Re: Feebay "Turner" Special

Postby R.K. Maroon » Tue Aug 14, 2018 10:37 pm

Steve's copper-side E-unit is rare, as best I can tell. Here is a clp from a 1946 ad for the copper-sided version:

Exacta 1946.JPG
Exacta 1946.JPG (51.35 KiB) Viewed 3169 times

And here is a clip from a 1947 flyer for the cast version:

Exacta 1947.JPG
Exacta 1947.JPG (33.24 KiB) Viewed 3169 times

I have never seen a copper-sided A or B unit, but I certainly don't doubt that Steve has one. I know of a half-dozen of the cast units.

Jim
The link below any photo will display the image full size

Carey Williams
Posts: 687
Joined: Sat Dec 24, 2016 3:10 pm

Re: Feebay "Turner" Special

Postby Carey Williams » Tue Aug 14, 2018 11:08 pm

Thank you all for the Exacta educational courses....46~9 were exciting times in the O scale diesel world . One needs a play book to follow all the actors.
Cheers Carey


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: Google [Bot] and 62 guests