Wood tenders, etc
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Wood tenders, etc
Something that caught my eye and made me think of Mr. Turner...
http://www.ebay.com/itm/M-Smart-O-Scale ... Sw42dZJjiF
Seller has several different ones listed along with few boilers, etc.....
http://www.ebay.com/itm/M-Smart-O-Scale ... Sw42dZJjiF
Seller has several different ones listed along with few boilers, etc.....
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
- R.K. Maroon
- Posts: 2934
- Joined: Tue Feb 22, 2011 9:20 pm
Re: Wood tenders, etc
I saw these too. I recall there was also a boiler or two. I have never heard of M-Smart, but I will keep an eye out henceforth.
Slow progress is better than no progress
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Re: Wood tenders, etc
R.K. Maroon wrote:I saw these too. I recall there was also a boiler or two. I have never heard of M-Smart, but I will keep an eye out henceforth.
More than 2 listed now - never heard of M-Smart either!
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Re: Wood tenders, etc
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
-
- Posts: 12850
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wood tenders, etc
Several of my tenders are wood blocks. Two have brass overlays - if my Cab Forward thread still exists, my #4104 has a wood block tender, as does one of my Lobaugh Challengers. Not a great idea, now that we are thinking about sound and battery power.
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Re: Wood tenders, etc
bob turner wrote:Several of my tenders are wood blocks.
That's what I remembered; thought you'd have a few thoughts on these given your experience on the subject.
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
-
- Posts: 12850
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wood tenders, etc
Another computer lesson for me - tried to edit a copy of the AC-4 tender. Computer sent it to "not trains" instead of the file with the original. Had to do a search. Wood block, with overlays. My father cast those sideframes from my patterns. No, the SP never ran Buckeyes under a 160C.
My first wood block was not so elegant:
And this one was a quickie - did not want to do compound curves in brass.
My first wood block was not so elegant:
And this one was a quickie - did not want to do compound curves in brass.
-
- Posts: 1980
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Wood tenders, etc
I've know some scratch builders that soldered their boilers and tender shells over wood forms. Could these not be forms for doing just that? After soldering they remove the wood form. As a matter of fact I have a couple from Will (SI) Simonton.
Jay
Jay
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Re: Wood tenders, etc
Jay Criswell wrote:I've know some scratch builders that soldered their boilers and tender shells over wood forms. Could these not be forms for doing just that? After soldering they remove the wood form. As a matter of fact I have a couple from Will (SI) Simonton.
Hmmmmmm............. I might be able to use them for a master to cast a tender body in resin a la Prof. Reutling,
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
-
- Posts: 562
- Joined: Sat Dec 24, 2016 3:10 pm
Re: Wood tenders, etc
Hello wood block admirers.
I did a quick check in Model Railroading 1943-44 ..flipping through the ads sections assuming wood blocks would be all the range during the metal starved WW2 period ..various ads for the wood car kits ..but no mention of engines ... or any sign of M Smart ...
C D Models of Cleveland were big into wood models ...planes and created with the birth of "S" gauge ..3/16" scale 7/8" gauge ... beginning in 1936? Ads for wood trains covered with paper graphics appeared ..including a full Hiawatha train .
A C Gilbert jumped on the 3/16" train adapting his O scale line to it pre-war .... and stealing the "S" gauge market post war ....
CD models but a foot note ..
Cheers Carey
I did a quick check in Model Railroading 1943-44 ..flipping through the ads sections assuming wood blocks would be all the range during the metal starved WW2 period ..various ads for the wood car kits ..but no mention of engines ... or any sign of M Smart ...
C D Models of Cleveland were big into wood models ...planes and created with the birth of "S" gauge ..3/16" scale 7/8" gauge ... beginning in 1936? Ads for wood trains covered with paper graphics appeared ..including a full Hiawatha train .
A C Gilbert jumped on the 3/16" train adapting his O scale line to it pre-war .... and stealing the "S" gauge market post war ....
CD models but a foot note ..
Cheers Carey
-
- Posts: 1980
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Wood tenders, etc
Sure, Varney and Strombecker did it in HO but used overlays. The Varney version was foil cover and the Strombecker was pre-printed.
If you guys would do a little more research you'd find numerous articles describing the use of these types of wood blocks when building fabricated boilers and tenders. Thornburg (sic) did it frequently. It was common practice. I'm not saying that's exactly what these are but, to me, it makes the most sense....of course since I don't have any common sense all my statements are moot!
Jay
If you guys would do a little more research you'd find numerous articles describing the use of these types of wood blocks when building fabricated boilers and tenders. Thornburg (sic) did it frequently. It was common practice. I'm not saying that's exactly what these are but, to me, it makes the most sense....of course since I don't have any common sense all my statements are moot!
Jay
-
- Posts: 12850
- Joined: Sat Jan 13, 2007 7:57 pm
Re: Wood tenders, etc
Jay is spot-on. A wood block as a bending jig and soldering fixture is almost essential. In the above cases and one other, I have simply left the block "in." The Challenger tender is only recognizable from the bottom - the rest looks like a standard brass shell.
Oh, and the NP Challenger needed no rivets, so the wood block stands by itself. Photo soon.
Oh, and the NP Challenger needed no rivets, so the wood block stands by itself. Photo soon.
-
- Posts: 41330
- Joined: Wed May 16, 2007 6:52 am
- Location: Departed from this forum
Re: Wood tenders, etc
Jay Criswell wrote:Sure, Varney and Strombecker did it in HO but used overlays. The Varney version was foil cover and the Strombecker was pre-printed.
If you guys would do a little more research you'd find numerous articles describing the use of these types of wood blocks when building fabricated boilers and tenders. Thornburg (sic) did it frequently. It was common practice. I'm not saying that's exactly what these are but, to me, it makes the most sense....of course since I don't have any common sense all my statements are moot!
Oh, I think you're spot on for purpose.
I am familiar with the use of wood blocks and forms for building things; just have not seen ones as nice and clean as most of these are....and thjat's just a wee bit before my time, too.
Conservatism: The intense fear that somewhere, somehow, someone you think is inferior is being treated as your equal.
-
- Posts: 1980
- Joined: Thu Mar 06, 2008 12:38 pm
Re: Wood tenders, etc
Is it possible they were never used for their intended purpose? Yeah, I know, speculation, at best.
Jay
Jay
Return to “O-Gauge, 2-Rail, Model Railroading”
Who is online
Users browsing this forum: Chris Webster and 33 guests