Recent acquisitions & restoration projects.....

Discuss All Facets of 2-Rail, 1/48 Scale, Model Railroading
User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Sun May 19, 2013 11:35 am

Got all of the interior together; just have to assemble it and insert the floor unit.

Image

Got to paint the floor unit 1st though...
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Yves
Posts: 429
Joined: Mon May 21, 2007 12:50 pm

Re: Recent acquistions & restoration projects.....

Postby Yves » Mon May 20, 2013 11:03 am

Martin,

You should put together all the information about the restoration of that passenger car and publish an article on our favorite magazine.
I really love the wood work. Very well done.
Sorry to hear your hurt yourself.

Yves

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Mon May 20, 2013 1:08 pm

Yves wrote:Martin,

You should put together all the information about the restoration of that passenger car and publish an article on our favorite magazine.


I guessI could have but with it being here already it's a bit redundant - anyway, I've just about wrapped up another article to send to Joe.

I really love the wood work. Very well done.


It was a bit tedious but still rewarding once completed, :wink:

Sorry to hear your hurt yourself.


Forgetting about the low cross rafter in my woodshed Sat was a lot more painful and remains with me now...
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Tue May 28, 2013 8:09 pm

Almost done - just need a set of smaller dry transfers in gold to finish this off. Used the original roof and the fit is less than perfect, but I'm going to leave it at that.

Image

Image

Image
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

DeBruin
Posts: 892
Joined: Sat Aug 07, 2010 1:05 pm
Location: Temple of Radon

Re: Recent acquistions & restoration projects.....

Postby DeBruin » Tue May 28, 2013 10:35 pm

Excellent car Rufus,
you-oo-oo-oo-o've got the magic touch (wao woh woah)

Seriously though, look forward to a three quarter short with your choice of power on this one

reminds of the pre-McGinnis and 'T' B&M commuter service, though more modern :wink:

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Wed May 29, 2013 10:08 am

Thank you!

I'm off to build a couple of cabooses that are long, long overdue to be addressed (listen up there, Jon!!). :lol: :lol: :lol:

After get them done, it's back onto the restoration road...........
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Sun Jul 28, 2013 12:49 pm

Finally put the final lettering on this car after I got some smaller gold dry transfers. Would have really liked them to be slightly smaller to get the additional lettering that preceded the number, but it's probably just going to have to do as is...

Image

Image
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Erik C Lindgren
Posts: 1307
Joined: Wed Apr 28, 2010 11:37 pm
Contact:

Re: Recent acquistions & restoration projects.....

Postby Erik C Lindgren » Wed Aug 07, 2013 9:47 pm

snagged a OMI SD-9 - did her up in Blackbird 8)

It runs well but I plan to repower

Image
Image
Image
Image
Image
Image
Image
Image
Image

User avatar
rogruth
Posts: 24452
Joined: Sun Aug 14, 2005 8:32 pm
Location: pembroke,ga

Re: Recent acquistions & restoration projects.....

Postby rogruth » Wed Aug 07, 2013 9:55 pm

Rufus,Erik and others.

Do you put scale model people in your locos,cabooses,passenger cars,etc.,?
roger

I support thread drift.
If God didn't want women to be looked at, He would have made 'em ugly. RAH

User avatar
Erik C Lindgren
Posts: 1307
Joined: Wed Apr 28, 2010 11:37 pm
Contact:

Re: Recent acquistions & restoration projects.....

Postby Erik C Lindgren » Wed Aug 07, 2013 10:00 pm

SURE! I do sometimes

Image

Image

Image

Image

Image
I can smell the bacon

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Thu Aug 08, 2013 7:45 am

rogruth wrote:Rufus,Erik and others.

Do you put scale model people in your locos,cabooses,passenger cars,etc.,?


Yes, but not always. Depends on the car and what it's purpose is and how I feel about it and the scene that I might be setting within the car itself.

If I could find passengers for the 1880-1920 era, I might do more with the interior populations in my passenger cars.
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Tue Oct 22, 2013 9:22 am

A recent arrival to the shop......fragile, barely structually stable, and will be a fun rebuild, too! Don't know it this was a kit or what, but I bought 5 cars to get this one - the other 4 are actively looking for new homes already, :lol:

Image

Image

I think that while I reassemble//restore it, that I may build a copy or 2 in parallel, too :wink:
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.

User avatar
2railjon
Posts: 15906
Joined: Fri Apr 02, 2004 2:33 pm

Re: Recent acquistions & restoration projects.....

Postby 2railjon » Tue Oct 22, 2013 12:26 pm

Rufus and Erik, your work is inspirational!!!!
:D
Running that red block Charlie.

User avatar
R.K. Maroon
Posts: 3133
Joined: Tue Feb 22, 2011 9:20 pm

Re: Recent acquistions & restoration projects.....

Postby R.K. Maroon » Tue Oct 22, 2013 12:39 pm

Martin, I am glad you wound up with that CP "Conductors Van". I saw that on eBay and considered it myself just based on cool-factor alone. I am resisting such impulses these days though and did not bid. But I am not surprised you did!

Jim
The link below any photo will display the image full size

User avatar
Rufus T. Firefly
Posts: 42114
Joined: Wed May 16, 2007 7:52 am
Location: To be Determined

Re: Recent acquistions & restoration projects.....

Postby Rufus T. Firefly » Tue Oct 22, 2013 12:49 pm

R.K. Maroon wrote:Martin, I am glad you wound up with that CP "Conductors Van". I saw that on eBay and considered it myself just based on cool-factor alone. I am resisting such impulses these days though and did not bid. But I am not surprised you did!

Jim


First time around it was part of a huge lot of stuff far and away beyond anything that I would normally consider buying, although there were a few other items in there that were calling to me. This car caught my eye then and I saved a picture of it for future reference.

Then it was listed with just 4 other cars - I can handle that easily enough. Was relieved by the lack of competition then and now more than ever!
Once, men turned their thinking over to machines in the hopes that this would set them free. But that only permitted other men with machines to enslave them.


Return to “O-Gauge, 2-Rail, Model Railroading”

Who is online

Users browsing this forum: No registered users and 30 guests