Standard Gauge stuff

Standard Gauge Trains, Vintage to Modern
User avatar
healey36
Posts: 2652
Joined: Fri Sep 03, 2010 3:43 pm
Location: Westminster, MD

Standard Gauge stuff

Postby healey36 » Mon Dec 04, 2017 11:26 am

Hmmm...the standard gauge topics didn't survive the last purge. Need to start a new general thread.

Pulled down the MTH 9E shelf-queen recently...it was totally dead after years of no track-time. Applied power...nothin'. Dropped in a new battery but still no operation. No clanks-of-death, just nothin'. Took it in to the guys at Toy Trains Unlimited in Hanover PA figuring it needed a hard-reset or some sort of chip replacement. It runs well now.

Image

This thing is tempermental as hell. Using the Lionel LW I got from Kent you need to start-cycle it at a low voltage. Too much power and it just sits there clanking at you, lol.

I am figuring on running this under the Christmas tree this year on a loop of 42-inch radius track. I'll zip-tie the sections together but expect it will be off the track a lot...kids can't seem to resist running stuff at full steam, err voltage...

Healey

User avatar
Rufus T. Firefly
Posts: 20501
Joined: Wed May 16, 2007 6:52 am
Location: Freedonia

Re: Standard Gauge stuff

Postby Rufus T. Firefly » Mon Dec 04, 2017 1:21 pm

healey36 wrote:I am figuring on running this under the Christmas tree this year on a loop of 42-inch radius track.


Hmmmm.............giving me ideas here. Maybe I will take out my father's 10E....
You rest comfortably in seats of inscrutable power, hiding behind your false idol, far from judgment, lives shrouded in secrecy, even from each other. But not from God.

User avatar
healey36
Posts: 2652
Joined: Fri Sep 03, 2010 3:43 pm
Location: Westminster, MD

Re: Standard Gauge stuff

Postby healey36 » Tue Dec 05, 2017 8:08 am

Excellent!

User avatar
Rufus T. Firefly
Posts: 20501
Joined: Wed May 16, 2007 6:52 am
Location: Freedonia

Re: Standard Gauge stuff

Postby Rufus T. Firefly » Tue Dec 05, 2017 11:25 am

healey36 wrote:Excellent!


If I can find the track, :roll: :roll: :lol: :lol: :lol:
You rest comfortably in seats of inscrutable power, hiding behind your false idol, far from judgment, lives shrouded in secrecy, even from each other. But not from God.

Carey Williams
Posts: 266
Joined: Sat Dec 24, 2016 3:10 pm

Re: Standard Gauge stuff

Postby Carey Williams » Thu Dec 14, 2017 12:20 am

Hello Standard gauge folks

Here is a link to watch a Lionel 1912 pulling some knobby cars ..all circa 1910 ...and a #5 pulling some 10 series freights #5 1907 , freights 1909.. layout still a work in progress..but note early split pin track ..pre 1912 .
Cheers Carey

https://www.youtube.com/watch?v=c_-221KL1eE

User avatar
healey36
Posts: 2652
Joined: Fri Sep 03, 2010 3:43 pm
Location: Westminster, MD

Re: Standard Gauge stuff

Postby healey36 » Sat Dec 16, 2017 6:30 pm

Really nice gear Carey. It still amazes me that the stuff runs more than one hundred years later. I have a late 33, probably 1926 or so, that runs like a clock. It was the first piece of std gauge I ever bought. Despite a poor refurbish job by a previous owner it’s still a favorite.

Healey

E7
Posts: 4334
Joined: Wed Dec 12, 2007 1:35 am

Re: Standard Gauge stuff

Postby E7 » Mon Dec 25, 2017 12:26 pm

This one will drive you guys wild!

https://www.youtube.com/watch?v=ApJa04UYrWk
"We have met the enemy and he is us!" Pogo Possum

User avatar
healey36
Posts: 2652
Joined: Fri Sep 03, 2010 3:43 pm
Location: Westminster, MD

Re: Standard Gauge stuff

Postby healey36 » Tue Dec 26, 2017 3:40 pm

Yeah, I remember that video, matter of fact I've got a copy of it around here somewhere. The Old Man used to tell me there was a fine line between being a collector and being a hoarder, and Frank IMHO seemed to cross that line. How many flippin' State sets do you need? I once ran into a guy at a meet who was snapping up prewar Lionel 2-6-4's (sometimes referred to as Berk's by collectors). He told me he had close to sixty of them in his collection. WTF, I don't understand that mentality, but I think it ran deep during the early days of the TCA. Now those guys are all box collectors...

Man, I'm bitter, lol...

User avatar
webenda
Posts: 11283
Joined: Sun Jan 09, 2005 4:05 pm
Location: Tucson

Re: Standard Gauge stuff

Postby webenda » Fri Dec 29, 2017 1:17 am

I really like your standard gauge photos Healy. :D

I wish you would stop posting them... they make me want to buy one of those beautiful restored or new locomotives. :roll:

Well, you can keep posting them, they provide the opportunity to practice for self-control. :wink:
----Wayne----

MAÑANA ES EL DÍA MÁS BUSCADO DE LA SEMANA
--Proverbio Mexicano

User avatar
healey36
Posts: 2652
Joined: Fri Sep 03, 2010 3:43 pm
Location: Westminster, MD

Re: Standard Gauge stuff

Postby healey36 » Fri Dec 29, 2017 3:26 pm

Prices for the non-pristine originals are coming down Wayne, pretty quickly from my perspective. Watch eBay...you can find nice well-used Lionel 8's and 10's for reasonable money these days. The pre-Lionel Corp versions of MTH's repro's are falling in price as well. The 9E above, an early Protosound unit, probably listed for $500 when new...doubt you could get $150 for it now.

I'm told my maternal grandfather received a standard gauge set as a boy, something that's hard to imagine now. Must have been something cracking those boxes Christmas AM...

User avatar
webenda
Posts: 11283
Joined: Sun Jan 09, 2005 4:05 pm
Location: Tucson

Re: Standard Gauge stuff

Postby webenda » Mon Jan 01, 2018 3:10 am

healey36 wrote:Prices for the non-pristine originals are coming down Wayne, pretty quickly from my perspective. Watch eBay...

Nooooooo! :shock: Stop it! :lol:
----Wayne----

MAÑANA ES EL DÍA MÁS BUSCADO DE LA SEMANA
--Proverbio Mexicano


Return to “Standard Gauge Trains”

Who is online

Users browsing this forum: No registered users and 2 guests