Wiring Williams Dash-9 Motors In Series

All Facets of O-Gauge, 3-Rail, Model Railroading
User avatar
webenda
Posts: 10103
Joined: Sun Jan 09, 2005 4:05 pm
Location: Tucson

Re: Wiring Williams Dash-9 Motors In Series

Postby webenda » Wed Jan 11, 2017 9:31 am

Edit 1: Deleted, this was an accidental repeat post. See previous post.
Last edited by webenda on Wed Jan 11, 2017 1:32 pm, edited 1 time in total.
----Wayne----

"Infinity is bigger than you think."
--Georg Cantor

Tom Dempsey
Posts: 272
Joined: Mon Dec 23, 2013 10:15 pm

Re: Wiring Williams Dash-9 Motors In Series

Postby Tom Dempsey » Wed Jan 11, 2017 12:53 pm

Thanks Wayne, I'm used to seeing a clock input being part of a serial data buss and it doesn't look to me like enough circuits present to require that. Makes sense now, just a different use of the term clock.

User avatar
Mitch
Posts: 4356
Joined: Sat May 28, 2005 1:06 pm
Location: Freeport, Pa.

Re: Wiring Williams Dash-9 Motors In Series

Postby Mitch » Wed Jan 11, 2017 8:09 pm

webenda wrote:
Arthur P. Bloom wrote:Electrons are color-blind.

Indeed!

Image


Mitch can't see the number in the circle either! :wink: :lol:
It is better to have loved and lost than to live with a psycho for the rest of your life!

User avatar
webenda
Posts: 10103
Joined: Sun Jan 09, 2005 4:05 pm
Location: Tucson

Re: Wiring Williams Dash-9 Motors In Series

Postby webenda » Wed Jan 11, 2017 10:56 pm

I changed the colors. Can you see the number now Mitch?
Attachments
Electrons are Color Blind.png
Electrons are Color Blind.png (317.3 KiB) Viewed 87 times
----Wayne----

"Infinity is bigger than you think."
--Georg Cantor

User avatar
Mitch
Posts: 4356
Joined: Sat May 28, 2005 1:06 pm
Location: Freeport, Pa.

Re: Wiring Williams Dash-9 Motors In Series

Postby Mitch » Thu Jan 12, 2017 6:45 am

I see it just fine in pic #2, Wayne. I've scrolled up an down over the two pics and tried to superimpose the blue over the other, but I just get lost on Pic #1. I am just horribly red/green defective. And to think, I've been doin' car wiring for nearly 25 years! Good thing we have schematics and connector pinouts. :wink: What kills me in car wiring is: "Is it green with a white trace, or brown with a white trace, violet/yellow or pink/yellow, pink or just plain faded out orange? It can be challenging. :lol:
It is better to have loved and lost than to live with a psycho for the rest of your life!

User avatar
webenda
Posts: 10103
Joined: Sun Jan 09, 2005 4:05 pm
Location: Tucson

Re: Wiring Williams Dash-9 Motors In Series

Postby webenda » Thu Jan 12, 2017 12:35 pm

I can't see it in card one either Mitch. I can differentiate what I see as brown and red but lose it between the upper and lower part of the 7 and left side of the 4. I was guessing 21.

You might think I would have trouble with resistor color codes. I do in normal room lighting. I got along in a mostly electronic career by using a bright light to read the code. Violet is the worst, looks grey to me under room lighting.
Attachments
27k ohms.png
27k ohms.png (8.24 KiB) Viewed 55 times
----Wayne----

"Infinity is bigger than you think."
--Georg Cantor


Return to “O-Gauge, 3-Rail, Model Railroading”

Who is online

Users browsing this forum: Seaboard Air Line Fan and 2 guests